BTZJ-IV Plane and tridimensional footprint investigation kit
Function
A. Lift a trail of dust prints with electrostatic dust print lifter.
B. Lift single dust print with electrostatic dust print lifter.
C. Lift dust print on soft surface with electrostatic dust print lifter.
D. Lift dust print with adhesive footprint lifting tape.
E. Lift water-stained print with black silica gel footprint lifter.
F. Cast footprint with the gypsum
Content
| No. | Product name | Quantity | No. | Product name | Quantity |
| 1 | BTJD-VI electrostatic dust print lifter | 1 piece | 13 | Black silicone footprint lifter | 5 sheets |
| 2 | 1.2m ground wire | 1 piece | 14 | 30 x 15cm angle scale | 2 pieces |
| 3 | 8m ground wire extension | 1 piece | 15 | 5-meter tape measure | 1 piece |
| 4 | Charger | 1 piece | 16 | Red-yellow-white waterproof chalk | 3 pieces |
| 5 | Power adapter | 1 piece | 17 | Towel | 1 piece |
| 6 | Lifting film for a trail of dust prints | 10 rolls | 18 | Cotton jersey gloves | 2 pairs |
| 7 | Lifting film for single dust print | 14 pcs | 19 | Disposable shoe covers | 4 pairs |
| 8 | Electrostatic lifting mat | 4 sheets | 20 | Disposable mask | 5 pieces |
| 9 | Footprint protection box | 1 piece | 21 | Disposable cap | 5 pieces |
| 10 | Dust fixative | 1 bottle | 22 | Footprint casting kit | 1 piece |
| 11 | Footprint lifter with black backing card | 5 sheets | 23 | Aluminum case | 1 piece |
| 12 | Footprint lifter with white backing card | 5 sheets | | | |
Content of tridimensional footprint collecting box
| Plastic footprint casting frame | 2 pairs | Inserted together into a rectangular frame to enclose the footprint. |
| Standard bagged gypsum | 2 bags | Pour a bottle of water into the gypsum bag. Seal the bag and knead the mixture with hand until no lumps are felt. Then, slowly pour the mixture on the footprint. One bag of gypsum can cast a footprint. |
| Nominal capacity water bottle | 1 piece |
| Fiber mesh | 2 pieces | After pouring half of the gypsum, place the fiber mesh on the footprint; then, pour the remaining gypsum. |
| Footprint description label | 2 pieces | After the gypsum is poured, place the footprint label on the footprint. After the gypsum solidifies, the footprint label is fixed as well, which can be used to record the case detail. |
Specifications
Weight: 10.6kg
Size: 565 x 295 x 225mm
Methods of Procedure
Step 1. Open the package, take out the frame, uncover the glue protective paper and adhere the bounding rectangle to form a footprint casting frame.
Step 2. Insert the frame into ground to enclose the footprint, fill the gap in the bottom of the frame by fine sandy soil, to avoid gypsum leaking out.
Step 3. Open the gypsum bag and pour 1200ml (about 2 measuring cups) water into the bag.
Step 4. Seal up the gypsum bag by hardly pressing the sealing strip. Wag the gypsum bag from side to side until no gypsum blocks existed.
Step 5. Pour the gypsum mixture slowly beside the frame, instead of pouring down directly on the footprint.
Step 6. When pouring 2/3 of the mixture, place the fiber mesh and footprint description label on the footprint; then, pour the remaining gypsum.
Step 7. About 30 minutes later the gypsum is solidified. Tear off the frame from the footprint and wash it by water.
Step 8. The fixed footprint can be used to mark case details and convenient for storage.
Product Application
Application areas for our products include crime scene investigation, fingerprint collection and development, footprint collection and development, tool marks collection, trace evidence collection, documents examination, forensic medical examination, forensic evidence collection, DNA collection, DNA disinfection, criminal photography, criminal investigation light source, narcotic drugs test, poison test, evidence packaging, evidence marking, crime scene plotting, crime scene protection, human body protection on crime scene.
Our Service
We can provide reliable product and service for you.
1. Q: Is it a reliable company?
A: Beijing Bulant Police Equipment Co.,Ltd. is a company specialized in forensic product, such as: crime scene investigation, trace detection, fingerprint development and extraction, footprint extraction, micro-evidence extraction, files & documents inspection, gunshots detection, forensic examine, DNA extraction, criminal photograph, forensic light source, alcohol test, traffic scene investigation, drug & poison examine, evidence packaging, consumables in lab, etc.
2. Q: What about the delivery?
A: We can offer the door to door services by air or by sea just depend on your actual request. Such as DHL, UPS, TNT, FEDEX…
3. Q: What is the package?
A: Aluminum alloy case/carton case/wooden case.
4. Q: Do you have any timely technology supports?
A: We have a professional technology supporting team for your timely services. We prepare the technical documents for you, also you can contact us by telephone, webcam, online chat (google talk, MSN, skype, yahoo).
5. Q: What is the payment method?
A: T/T, WESTERN UNION, MONEY GRAM, ESCROW, PAYPAL
6. Q: Do you take part in the world exhibition every year?
A: Yes, we took part in exhibitions every year since 2008.
Product Tags:
|
|
G051 BTZJ-IV Plane and tridimensional footprint investigation kit Images
|
